A practical workbench for groundwater simulations
Anaqsim helps engineers and geoscientists test ideas, refine models, and solve real project problems faster without getting buried in grids
An-Aq-Sim (Analytic Aquifer Simulator)
Build it, test it, refine it
Trusted by Governments and Industry globally:
You should not need to fight the model to test an idea
Your projects change. Boundaries move. Your understanding of site conditions evolves. Small changes should not force you into major model rework, and useful experimentation should not depend on you becoming a grid or mesh expert first.
When you are working through a groundwater problem, the software should help you think it through, not slow you down..
“What I cannot create, I do not understand.” – Richard Feynman
Anaqsim has been widely used within the SFWMD for the cross section modeling of seepage from stormwater impoundments. Its modeling capabilities with varying numbers of layers make it especially useful for three-dimensional modeling of seepage from surface reservoirs.
Build models big and small
Anaqsim helps you build and refine groundwater models across a wide range of project scales. From drainage design and dewatering to regional aquifer management, it gives you a practical workspace for work that changes as projects evolve.
For Site Scale Work
- Construction dewatering
- Foundation drainage
- Remediation design
- Injection/ pumping well systems
- Cofferdams
- Cutoff wall design
For Regional Scale Work
- Mining impacts
- Aquifer Storage & Recovery
- Watershed analysis
- Contamination potential
- Recharge assessment
- Groundwater planning
Try it risk free for 14 days – No credit card required
What this modelling workbench lets you do
Anaqsim is built on the analytic element method, a mesh-free way to model groundwater flow. It represents groundwater features directly with elements and supports a rapid “Build it, test it, refine it” approach.
Start Building Sooner
Start building and working with your model even when field data is incomplete, then refine it as new information becomes available.
Collaborative Building
Refine your model as team input and new ideas or designs arrive.
Problem Focused
Spend your time working through the groundwater problem instead of discretizing and re-discretizing grids or meshes. Build your model quickly. Revise it quickly.
Built to Keep Up
Build your model around groundwater features instead of a grid or mesh, so it feels more intuitive and is easier to explain.
Benchmarked Against an Established Standard
Trust in a groundwater model comes from more than speed or ease of use. It also comes from seeing how the software performs against established methods. This example compares Anaqsim and MODFLOW on the same groundwater scenario and shows matching piezometric contours under the same modeled conditions. For more benchmarking and real-world comparisons, see our case studies.
– Rectangular domain
– 2 head boundaries
– 2 no-flow boundaries
– 2 distinct zones
– 2 distinct thickness zones
– 2 different anisotropy zones
– 2 different recharge zones
– Simple surface water zone
– 2 wells at different screening depths
– Simulated aquifer is unconfined
– Transient simulation
Get Started in Minutes
Frequently Asked Questions
What is the Analytic Element Method (AEM) in practical terms?
The Analytic Element Method is a mesh-free way to model groundwater flow. Instead of using a grid or mesh, it uses elements to represent the real features of the groundwater system, such as wells, boundaries, recharge areas, and changes in aquifer properties.
How is Anaqsim different from other AEM software?
Anaqsim extends AEM with a subdomain approach that can handle full 3D conditions, layered systems, anisotropy, heterogeneity, and transient flow. It keeps that capability in a practical workflow that is quick to revise as project understanding evolves.
How does Anaqsim compare with MODFLOW and FEFLOW?
MODFLOW and FEFLOW use grids or meshes, while Anaqsim uses a mesh-free AEM approach that is much quicker to set up and revise, especially when project questions, boundaries, or site understanding change. Although these methods use different solution approaches, they are based on the same groundwater physics. When the same assumptions are used, they should produce very similar answers. See our case studies for comparisons with real-world observations as well as FEFLOW and MODFLOW models.
Can Anaqsim handle transient flow, layered systems, and anisotropy?
Yes. Anaqsim can handle transient flow, multi-layer aquifer systems, anisotropy, and heterogeneity without giving up the quick setup and revision workflow that makes mesh-free AEM so useful in practice.
What does Anaqsim not simulate?
Anaqsim is designed for groundwater flow modeling. It does not simulate unsaturated flow, multi-phase flow, temperature, or contaminant fate and transport.
Is Anaqsim practical for beginners, or mainly for advanced modelers?
Anaqsim is practical for both. If you understand groundwater principles, you can start building useful models without first becoming a grid or mesh specialist. Guided examples, Blueprint Models, tutorials, and weekly sessions help you get useful work going quickly.
Free 14-day trial
No credit-card required